List of subclasses

Retour

15.3 Contractor – Oil burners

This subclass authorizes construction work that is the exclusive domain of master pipe mechanics under the Master Pipe Mechanics Act (CQLR, c. M-4) and relates to oil combustion systems.

It also authorizes construction work included in subclass 15.3.1.

Finally, it authorizes related construction work.   

Additional explanations

Section for contractors

Since November 19, 2001, the “Corporation des maîtres mécaniciens en tuyauterie du Québec” (CMMTQ—Québec Corporation of Master Pipe Mechanics) has been responsible for qualifying its members. It is therefore necessary to address this corporation for any question relating to the interpretation of this subclass.   

CMMTQ
Qualification Department
Tel.: 514 382-2668
Toll-free: 1 800 465-2668
Website: www.cmmtq.org
Email: cmmtq@cmmtq.org

Section for owner-builders

Since the Master Pipe Mechanics Act (CQLR, c. M-4) does not apply to owner-builders, the content of this owner-builder licence subclass is significantly different from that of the contractor’s. For example, this subclass is appropriate for construction work on natural gas burner systems everywhere in Québec, without exception. 

This subclass authorizes, without exceeding the regulatory framework, construction work relating to:

• the installation of oil stoves, floor oil furnaces, pot-type burners, etc. 
• the installation and connection of oil burners in a heating unit  
• the installation of oil supply pipes and connection to the burner   
• the installation of the oil tank connected to the burner (underground, above-ground, indoor or outdoor)   
• the installation of wall vents and flue pipes
• the connection to the chimney
• the installation and connection of prefabricated oil chimneys  
• the installation of a flue liner in an oil combustion chimney   
• the installation of controls and regulators for oil burners
• the maintenance and demolition of oil combustion systems